How to unplug the Moto Key?

1. The Moto Key cannot be pulled out when it is inserted. You can drop a small amount of oil into the keyhole. If there is no oil, cooking oil is also possible. Then gently turn the key to allow the oil to fully penetrate into the keyhole. Then use a wrench or pliers to pull out the key. After pulling out, put some oil on the key.

2. If it is a Moto Key that has not been touched for a long time, and suddenly I want to pull it out one day but cannot pull it out, you can also add a few drops of engine oil at this time, and then let it sit for a period of time. After one night, we will go again. When you remove the key, you will find it is very smooth. If there is rust on it, it is recommended to replace the Moto Key in time.

3. If the Moto Key cannot be pulled out and there is no oil, you can also shake the key left and right to loosen the lock cylinder, but this method has certain risks. If you use too much force, it is very likely that the key will be lost. Broken inside, so when using this method, be sure to grasp the strength, don't shake it up and down too hard, be patient and careful, the clamped lock cylinder will slowly loosen.